Britax Car Sea Bedienungsanleitung PDF herunterladen (Seite 9)

1514

Installation

Installation

Lap Belt Installation

Figure A illustrates a typical lap belt

configuration.

1 Insert recline bar into holes on

rear of restraint

(See page 18)

.

2 Place the child restraint in a

forward facing position on the

vehicle seat.

3

Pull the vehicle belt out, then pass

the vehicle belt through the first belt

slot, from the front of the restraint to

the rear

(Fig. B)

.

4

Route the vehicle belt around

the back of the restraint then

through the second belt slot,

from the rear of the restraint to

the front

(Fig. C)

.

B

A

C

5

Verify that the vehicle belt is

not twisted, then buckle. (

Fig. D)

.

6 Push restraint into the vehicle

seat with your full weight while

removing all slack from the vehicle

belt

(

Fig. E).

7 Verify that the vehicle belt is

tight and the child restraint is

secure.

Installation can be improved by the

use of the Versa-Tether

™

(see

pages 16–17).

IMPORTANT:

Always use the

Versa-Tether for children

weighing more than 50 pounds

(22.6 kg).

Removal

To remove the child restraint,

unfasten the vehicle belt and

reverse the above directions.

D

E

P2219_R02f.qxd 11/7/2002 10:23 AM Page 16

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Kommentare zu diesen Handbüchern

Keine Kommentare