Britax Car Sea Bedienungsanleitung PDF herunterladen (Seite 13)

The buckle has two positions and

should be adjusted to fit your child

(Fig. D). Select the slot closest to, but

not under, the child.

WARNING:

Do not use position two (2)

until child exceeds 50 pounds (22.6 kg)!

Remove the buckle, then rethread in

appropriate position. See page 26 for

buckle removal and rethreading

instructions.

2322

Harness Height Adjustment

Harness Height Adjustment

4 Thread the harness straps through the

appropriate harness slots (Fig. C).

5 Reattach harness straps to the yoke.

6 Pull harness adjuster strap to tighten the

harness.

7 Verify that all straps are threaded at the

same height and are not twisted.

Checking Harness Height:

1 Place child in restraint, then secure

harness (see pages

20–21

).

2 Observe where the shoulder harness is

positioned on your child.

•

Harness Straps should be located in

the nearest slot at or above the child’s

shoulder.

3 If harness height is okay, continue using

child restraint without adjustment. If

harness height requires adjustment, refer

to Adjusting Harness Height below.

NOTE:

Once the top slots become

necessary, your child may continue to use

the restraint until the top of the ears become

level with the top of the restraint shell, or

child weight exceeds 80 pounds (36 kg).

Harness Height Adjustment

1 Loosen the harness, by lifting the harness

release lever while pulling the shoulder

straps forward as far as possible (Fig. A).

2 From the rear of the child restraint,

unhook the shoulder harness from the

yoke (Fig. B).

3 Pull straps through the shell and cover,

to the front of the restraint.

B

C

A

Adjusting Buckle Position

D

P2219_R02f.qxd 11/7/2002 10:23 AM Page 24

1 2 ... 8 9 10 11 12 13 14 15 16 17

Kommentare zu diesen Handbüchern

Keine Kommentare