Britax Car Sea Bedienungsanleitung PDF herunterladen (Seite 12)

2120

Securing Your Child

Securing Your Child

Once the child restraint has been

installed in the vehicle, follow these

instructions to secure your child in the

child restraint.

IMPORTANT: Before securing your child

in the restraint, always check the adjuster

area for debris (e.g. food, coins, toys,

etc.). If debris is present, it must be

removed to prevent interference with the

adjuster mechanism.

1 Loosen the harness, by lifting the

adjuster lever located in front of the

restraint, then pull the shoulder straps

forward (Fig. A).

2 Unfasten the chest clip by

squeezing the

middle tab

. (Fig. B).

3 Unfasten the buckle by pressing down on

the middle button.

4 Move harness straps to the side of the

restraint. To aid in holding the straps, insert

the pieces of the chest clip into elastic

loops on the cover.

5 Place child in the restraint.

6 Position the harness straps around the

child and fasten the child restraint buckle

(Fig. C). Proper connection is confirmed

with a positive click after inserting the

second buckle tongue.

7 Gently pull up on the harness straps to

tighten the lap section of the harness,

which should fit low on your child's body.

8 Slowly pull the adjuster strap to tighten

the harness around the child (Fig. D).

IMPORTANT: Harness should have a

comfortable, but SNUG, fit around the

child. A snug fit allows you to place two

fingers between your child's collar bone

and the harness.

9

F

asten the chest clip by connecting the

two halves together (Fig. E).

IMPORTANT: The correct height for the

chest clip is at the middle of the chest, level

with the child's armpit (Fig. F).

10

Verify that harness is not twisted and

child is properly secured.

See Checking Harness Height on page 22.

A

B

C

D

E

F

P2219_R02f.qxd 11/7/2002 10:23 AM Page 22

1 2 ... 7 8 9 10 11 12 13 14 15 16 17

Kommentare zu diesen Handbüchern

Keine Kommentare